Department of Materials And Metallurgical Engineering

Metallurgical Engineering provides the opportunity for the study, design, implementation, and improvement of processes regarding the transformation of mineral resources and metals into useful products.  A metallurgical engineers’ job is to fulfill the mineral and metal product needs of the society. This should be done while they do their best to do their job in a nature-friendly approach by which they minimize waste, maximize energy efficiency, and facilitate recycling.

The Department of Materials Science & Metallurgy has a large and vigorous research faculty, with about 100 research fellows, postdoctoral scientists and visiting scientists, and more than 140 research students studying for the PhD degree. The Department of Materials Science & Metallurgy has a leading role in research and teaching regarding materials science. With an academic staff of over 30, including Research Fellows, the Department's research covers all major areas of the subject, and this breadth is reflected in the scope of our four-year undergraduate course.

The emphasis in undergraduate teaching, which was established in 1993, is on the principles applicable to the whole range of engineering materials such as metals, composites, ceramics, polymers, and solid state device materials. The lecture courses are presented along with laboratory experiments, applied projects, practical classes and supervisions. We try to maintain contact with the industry. After finishing 4 years of studies undergraduate students are prepared to work in the industry or run their own jobs.

Students were first admitted in the Masters’ degree at the Department of Material Science and Metallurgy in 2003. The aim of this program is to educate students advanced subjects in Metallurgy. Students in this program can study in one of the following majors (educational areas of specializations): Materials Section; Metal Corrosion and Protection, Metal Extraction.

In the doctoral program which was established in 2008, candidates study specialized subjects on Materials and Metallurgy.

Head of the Department of Materials And Metallurgical Engineering
Ali_Reza_Kiani_Rashid
Ali Reza Kiani Rashid
Professor
Department of Materials And Metallurgical Engineering
kianirashid@um.ac.ir
+98513880


Concentration areas offered by the Department of Materials And Metallurgical Engineering
Areas Bachelor's Master's Ph.D
Materials And Metallurgical Engineering
correct_mark -
-
Materials Section
-
correct_mark -
Corrosion & Protection
-
correct_mark -
Extraction -
correct_mark -

Academic staff

Abolfazl Babakhani
Professor
Ghasem Barati Darband
Assistant Professor
Behrooz Beidokhti
Associate Professor
Ali Davoodi
Associate Professor
Gholam Reza Ebrahimi
Professor
Mohammad Hassan Farshidi
Assistant Professor
Mohsen Haddad Sabzevar
Professor
Ali Reza Kiani Rashid
Professor
Mostafa Mirjalili
Assistant Professor
Mohammad Hadi Moayed
Professor
Ehsan Mohammadi Zahrani
Assistant Professor
Sahar Mollazadeh Beidokhti
Assistant Professor
Abolfazl Rezaee Bazzaz
Associate Professor
Samaneh Sahebian
Assistant Professor
Seyed Abdolkarim Sajjadi
Professor
Hossein Shalchian
Assistant Professor
Jalil Vahdati Khaki
Professor
Ahad Zabett
Associate Professor

Research

Recent journal articles

Barati Darband, G., Meysam Maleki, Arash Toghraei, & Shanmugam Sangaraju (2023). Electrodeposition of self-supported transition metal phosphides nanosheets as efficient hydrazine-assisted electrolytic hydrogen production catalyst. International Journal of Hydrogen Energy, 48 (11), 4253-4263.
Shahab Paygozar, Alireza Sabour Rouh Aghdam, Hassanizadeh, S., Reza Andaveh, & Barati Darband, G. (2023). Recent progress in non-noble metal-based electrocatalysts for urea-assisted electrochemical hydrogen production. International Journal of Hydrogen Energy, 48 (20), 7219-7259.
Reza Andaveh, Alireza Sabour Rouhaghdam, Jianping Ai, Meysam Maleki, Kun Wang, Abdolvahab Seif, Barati Darband, G., & Jinyang Li (2023). Boosting the electrocatalytic activity of NiSe by introducing MnCo as an efficient heterostructured electrocatalyst for large-current-density alkaline seawater splitting. Applied Catalysis B: Environmental, 325 (), 122355-.
Heydari, S., Sajjadi, S., Babakhani, A., Hosain Eskandari, & Nateq, B. (2023). An investigation on the effect of Al4C3 on microstructure and mechanical properties of carbon nanotube reinforced aluminum composite. Ceramics International, 49 (9), 14024-14034.
Saberi Kakhki, Y., Sajjadi, S., & Mansouri, H. (2023). The effect of powder synthesis method on thermoelectric properties of Bi2Te2.7Se0.3 thin films. Journal of Materials Science: Materials in Electronics, 34 (1), -.
Asghari, M., Beidokhti, B., & Mollazadeh Beidokhti, S. (2023). Effect of the metallization method on properties of hybrid zirconia/Ti–6Al–4V joints. Materials Chemistry and Physics, 296 (2), 127212-127212.
Farshidi, M. (2023). Grain refinement, texture evolutions, and strengthening of a recycled aluminium alloy subjected to tube channel pressing. Kovove Materialy, 61 (1), -.
Saberi Kakhki, Y., & Sajjadi, S. (2023). The effect of thermal evaporation parameters on thermoelectric properties of Bi2Te2.7Se0.3 thin films produced from ball milled powder. Journal of Materials Science: Materials in Electronics, 34 (5), -.
Barati Darband, G. (2023). Electroless deposition of Ni-W-Mo-Co-P films as a binder-free, efficient and durable electrode for electrochemical hydrogen evolution. Electrochimica Acta, 446 (), 142001-142001.
Esmaeilzaei, A., Vahdati Khaki, J., Sajjadi, S., & Mollazadeh Beidokhti, S. (2023). Synthesis and crystallization of (Co, Cr, Fe, Mn, Ni)3O4 high entropy oxide: The role of fuel and fuel-to-oxidizer ratio. Journal of Solid State Chemistry, 321 (), 123912-.
Davoodi, A. (2023). Development of self-healable acrylic water-based environmental-friendly coating as an alternative to chromates coatings. Progress in Organic Coatings, 176 (6), 107402-107409.
Ghazi, T., Attar, M., Ghorbani, A., Alshihmani, H., Davoodi, A., Passandideh-fard, M. (2023). Synergistic effect of active-passive methods using fins surface roughness and fluid flow for improving cooling performance of heat sink heat pipes. Experimental Heat Transfer, 37 (6), 649-664.
Nazari, H., Barati Darband, G., & Arefinia, R. (2023). A review on electroless Ni–P nanocomposite coatings: effect of hard, soft, and synergistic nanoparticles. Journal of Materials Science, 58 (10), 4292-4358.
Sajjadi, S. (2023). Abnormal Trend of Ferrite Hardening in a Medium-Si Ferrite-Martensite Dual Phase Steel. Metals, 13 (3), 542-54216.
Mirjalili, M. (2023). Understanding Interfacial Reactions in Ti–Ni Diffusion Couple. Materials, 16 (6), 2267-2267.
Sarfaraz Khabaz, M., Mirjalili, M., Sajjadi, S., Vahdati Khaki, J., & Azimaee, H. (2023). Electrochemical properties of NiO–Ni electrocatalyst synthesized via solution combustion for methanol oxidation in alkaline media. Materials Today Chemistry, 30 (3), 101496-13.
Alireza Amirkhani, Kourosh Shirvani, Beidokhti, B., & Mohammad Reza Rahimipour (2023). Effect of two-step heating transient liquid phase bonding on microstructure and mechanical behaviour of IN-738LC gas turbine components. Proceedings of the Institution of Mechanical Engineers - Part L, 237 (5), 1071-1081.
Tahari, M., Vahdati Khaki, J., & Mirjalili, M. (2023). Microwave-Assisted Combustion Synthesis of Ni–Cr–Mo Superalloy Using Mixed Oxides: Mechanism and Thermodynamics Aspects. Metallurgical and Materials Transactions A, 54 (7), 2605-2616.
Seyyed Ali Sajadi, Mohammad Reza Toroghinejad, Ahmad Rezaeian, & Ebrahimi, G. (2023). Research on hot deformation behavior and constitutive model to predict flow stress of an annealed FeCrCuNi2Mn2 high-entropy alloy. Journal of Alloys and Compounds, 937 (5), 168267-188277.
Zahra Mohammad Kazemi, Alireza Sabour, Barati Darband, G., Meysam Maleki, Dabin Han, & Shanmugam Sangaraju (2023). Ultra-fast electrochemical preparation of Ni-Cu-Fe nano-micro dendrite as a highly active and stable electrocatalyst for overall water splitting. Electrochimica Acta, 456 (), 142468-.
M. Asgar, B. Abedi, A. Ashrafi, Barati Darband, G., & M. Monirvaghefi (2023). Electroless deposition of Ni-W-P films as binder-free, efficient and durable electrode for electrochemical hydrogen evolution. Materials Research Bulletin, 166 (), 112318-112318.
Masoud Zabihinezhad, Taghi Shahrab, Chen Zheng, Taihuan Shao, Barati Darband, G., & Jinyang Li (2023). Bi-functional Ni-Co-P/rGO/NF flower-like structure as an electrocatalyst for hydrogen production assisted by urea oxidation reaction. Journal of Electroanalytical Chemistry, 942 (), 117528-.
Modghan, N., Mazinani, M., Ebrahimi, G., & Hr Ezatpur (2023). Mechanical properties and fracture surface of Al-Al2O3 nano/micro-composites produced by accumulative roll bonding. Canadian Metallurgical Quarterly, 62 (3), 493-503.
Bojabadi, F., Kamali Heidari, E., & Sahebian, S. (2023). Hydrothermal synthesis of highly aligned Fe3O4 nanosplates on nickel foam. Materials Chemistry and Physics, 305 (), 127828-127828.
Saberi Kakhki, Y., Sajjadi, S., & Mansouri, H. (2023). The effect of fabrication method on thermoelectric properties of Bi2Te2.7Se0.3 thin films. Journal of Materials Science: Materials in Electronics, 34 (17), -.
A. Khajesarvi, S. S. Ghasemi Banadkouki, & Sajjadi, S. (2023). Effect of Carbon Partitioning on Abnormal Martensite Hardening in a Conventional Quench and Temper Medium Silicon Low Alloy Steel under Ferrite-Martensite Dual-Phase Microstructure. HTM Journal of Heat Treatment and Materials, 78 (3), 141-161.
Nateq, B., Haddad Sabzevar, M., Sajjadi, S., & Massimo Pellizzari (2023). Interfacial structure-property relationship in a carbon nanotube-reinforced aluminum alloy matrix composite fabricated by an advanced method. Materials Characterization, 203 (), 113159-11315911.
Modghan, N., Mirjalili, M., Moayed, M., & Barati Darband, G. (2023). A Suitable Porous Micro/Nanostructured Cu and Cu–Ni Film: Evaluation of Electrodeposition Behavior, Electrocatalytic Activity, and Surface Characterization of Porous Film. Journal of the Electrochemical Society, 170 (7), 076506-076506.
H.r. Ezatpour, Torabi Parizi, M., Ebrahimi, G., & Y. Huo (2023). Punching shear failure behavior of fine-grained ZK60 Mg alloy processed by a novel forward shear normal extrusion process at room and elevated temperatures. Engineering Failure Analysis, 153 (8), 107568-107585.
Ebrahimi, G. (2023). Microstructure evolution, hot deformation behaviour and processing map of Inconel X-750 superalloy in sub-solvus and super-solvus temperature ranges. Journal of Materials Research and Technology, 26 (5), 2365-2378.
Masoud Zabihinezhad, Taghi Shahrabi, Chen Zheng, Taihuan Shao, Barati Darband, G., & Jinyang Li (2023). Pulse-reverse electrodeposited reduced graphene oxide electrode decorated by Ni-P porous nano-layer as a high performance electrocatalyst for H2 production assisted by hydrazine electrooxidation. Applied Catalysis A: General, 666 (), 119415-.
Farshidi, M., Hiroyuki Miyamoto, & Haroka Ito (2023). Effect of pre-rolling aging treatment on evolutions of the microstructure and the texture of aluminium alloy 7005 subjected to heavy cold rolling. Acta Crystallographica Section B: Structural Science, Crystal Engineering and Materials, 79 (5), 408-413.
Tahari, M., Vahdati Khaki, J., & Mirjalili, M. (2023). Microstructure evolution of Ni-Cr-Mo superalloy fabricated by microwave-assisted combustion synthesis. Journal of Alloys and Compounds, 968 (), 172053-172061.
Ebrahimi, A., Zamyad, H., Safaie, J., & Sahebian, S. (2023). Design and characterization of electro-active soft actuator based on phase transition of microencapsulated silicon-ethanol composite. Journal of Thermoplastic Composite Materials, 37 (4), 1499-1518.
Shakib, S., Babakhani, A., & Kashefi Torbati, M. (2023). Nanomechanical assessment of tribological behavior of TiN/TiCN multi-layer hard coatings deposited by physical vapor deposition. Journal of Materials Research and Technology, 25 (), 1344-1354.
Ebrahimi, G. (2023). Hot compressive deformation behavior of Ti-8Al-1Mo-1V titanium alloy at elevated temperatures: Focus on flow behavior, constitutive modeling, and processing maps. Materials Today Communications, 37 (4), 107235-107248.
Zahra Bagheria, & Barati Darband, G. (2023). Molybdenum-doped Ni–S nanostructure towards energy saving for hydrogen production coupling urea oxidation reaction. Materials Today Sustainability, 24 (), 100584-.
Azimaee, H., Mirjalili, M., Vahdati Khaki, J., & Barati Darband, G. (2023). Electrosynthesis of Superhydrophilic Nickel Nanosheets on a Three-Dimensional Microporous Template: Applicability toward MOR. Langmuir, 39 (42), 14880-14890.
Shahab Paygozara, Barati Darband, G. (2023). Enhancing hydrogen generation through urea electro-oxidation on a bimetallic and dual-anionic NiFeSP/NF nanostructured electrode. Journal of Materials Chemistry C, 11 (45), 16074-16084.
Attar, M., Kazemi, M., Salami, B., Noori, H., Passandideh-fard, M., Davoodi, A., & Mohammadi, M. (2023). Improving Thermal Management of CPU by Surface Roughening of Heat Sinks. Arabian Journal for Science and Engineering, 49 (2), 2153-2164.
Mollazadeh Beidokhti, S. (2023). Fabrication and characterization of cobalt- and copper-doped mesoporous borate bioactive glasses for potential applications in tissue engineering. Ceramics International, 49 (23), 38773-38788.
Mollazadeh Beidokhti, S. (2023). Cu-Mn mixed-component oxide nanoparticles synthesized via the one-step solution combustion method with enhanced water evaporation efficiency. Journal of the Australian Ceramic Society, 59 (3), 795-809.
Marandi, S., Beidokhti, B., Sharifi, M., Mousavi Jarrahi, M., & Farshidianfar, M. (2023). Investigation of Microstructure and Wear Properties of Stellite 6 Laser Additive Manufactured Layers on Martensitic Stainless Steel Substrate. JOM, 75 (10), 4108-4114.
Beidokhti, B., Davoodi, A., & Amelzadeh, M. (2023). Evaluation of dissimilar 7075 aluminum/AISI 304 stainless steel joints using friction stir welding. Journal of Alloys and Metallurgical Systems, 3 (), 100017-100017.
Simin Nazarnezhad, Mollazadeh Beidokhti, S. (2023). Zinc- and Copper-Doped Mesoporous Borate Bioactive Glasses: Promising Additives for Potential Use in Skin Wound Healing Applications. International Journal of Molecular Sciences, 24 (2), 1304-1328.
Javadi, N., Mollazadeh Beidokhti, S., Vahdati Khaki, J., & Niazmand, H. (2023). Synthesis and post-heat treatment of complex compositions in Cu-Ti-O system: Phase investigation and optical properties. Materials Science and Engineering B, 292 (1), 116393-116412.
Akramii, N., Ghanad, M., Philipp Keil, Henrik Bradtmuller, Michael Ryan Hansen, Vahdati Khaki, J., & Mollazadeh Beidokhti, S. (2023). Microstructural Properties and in vitro Dissolution of Microporous Bioactive 13-93B3 Glass Powders Synthesized via Solution Combustion Synthesis. Journal of Non-Crystalline Solids, 615 (), 122425-122437.
Ghanad, M., Akramii, N., Vahdati Khaki, J., & Mollazadeh Beidokhti, S. (2023). Single-step solution combustion synthesis of porous 1393-B3 glass powders and structural characterization via solid-state NMR spectroscopy. Ceramics International, 49 (9), 14689-14701.
Barfi Sistani, P., Mollazadeh Beidokhti, S., & Kiani Rashid, A. (2023). The role of ZnO as an additive on the mechanical properties of zirconia-mullite composites. Journal of the Australian Ceramic Society, 59 (3), 739-749.
Poormoosavi, S., Seyedi, M., Moayed, M., Mirjalili, M., Taji, I., & Hosseini Mortazavi, S. (2023). High Potential Inhibition of the 17-4 PH Stainless Steel in the Presence of Nitrate and Evolution of Metastable Pitting. Corrosion, 79 (8), 964-972.
Sajjadi, S. (2023). Micro-Mechanical Analysis of Martensite and Ferrite Phases in a 35chgsa Medium-Silicon Steel. Social Science Research Network, (), -.
Sayyedan, F. (2023). Investigating the Microstructural, Mechanical, and Tribological Properties of NiCrBSi High-Velocity Oxygen Fuel and High-Pressure High-Velocity Oxygen Fuel Coatings. Journal of Materials Engineering and Performance, 32 (4), 1671-1682.

Recent theses and dissertations

Sedaghat, F. (2023). Corrosion and wear resistance of Titanium-Forsterite composite coating synthesized on Titanium alloy via friction stir processing. , ( Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Nasiri Kalatebali, M. (2023). Investigating the effect of superhydrophobic surfaces synthesis route on the corrosion resistance of Titanium alloy. , ( Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Nikbin, N. (2023). Corrosion behavior of magnesium alloy by hybrid LDH/PEO coating in the plasma-electrolytic oxidation process. , ( Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hamounpeyma, M. (2023). The effect of high entropy alloy particles on the mechanical behavior of aluminum matrix composites produced by accumulative roll bonding method. , ( Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Jafarimoghaddam, A. (2023). Investigation of the microstructure and corrosion resistance of laser cladded 2507 supper Duplex Steel coating on 4130 low alloy steel .. , ( Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Kazemi Zade, P. (2023). Electrodeposition of WO3 and the effect of different dopants on its electrochromic properties. , ( Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Najarnia, F. (2023). Fabrication of High Density Poly Ethylen/carbon Black/Magnetite Composite with Segregated Structure and Investigation of its electrical Conductivity and Electro-Magnetic Shielding properties. , ( Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Sami, N. (2023). In-situ Fabrication of Borate Glass/Hydroxyapatite Nanocomposites by Bio-Chemical and Bio-mechanical Characterization. , ( Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Shahla, M. (2023). effect of synthesis parameters on optical properties of ZnTiO3 and MnTiO3 perovskite nanocomposite synthesis by solution combustion. , ( Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Ehsanzadeh, M. (2023). Investigation of microstructure and fractional softening in multi-stage hot deformation of micro-alloyed steel containing vanadium-nitrogen. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Mostaani, R. (2023). Investigation on surface modification of current collector in lithium-ion batteries. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Zolnori, S. (2023). The effect of alloy elements and thermomechanical history on phase transformation and mechanical properties of x70 steel. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Soleymani, H. (2023). electrodeposition of gradient nanocomposite coating of nickel-tungsten alloy reinforced with alumina and MoS2 particles and investigation of wear and corrosion properties. , (Doctoral dissertation of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Saeidi Rashkoliaei, R. (2023). An investigation on the microstructure and texture evolutions of the commercially pure titanium grade 2 during equal channel angular pressing and subsequent annealing. , (Doctoral dissertation of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Pourmahdi, F. (2023). Electrodeposition of hierarchical nickel-copper-iron coating on plain carbon steel substrate and study of hydrophobicity and corrosion behavior. , (Doctoral dissertation of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hadian, M. (2023). Effect of Mg addition on the corrosion resistance of hot-dip galvanized Zn-Al coating on carbon steel. , (Doctoral dissertation of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Sharifi, M. (2023). Investigation on microstructure and wear resistance of high entropy alloy cladding layer on carbon steel substrate using welding process. , (Doctoral dissertation of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Takhtravan, E. (2023). Investigating the tribocorrosion and wear resistance of coating applied by plasma electrolytic oxidation method on friction-stir-processed commercially pure titanium substrate. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Ghayour Hallaj, I. (2023). The effect of quenching and partitioning heat treatment on the microstructure of Carbide-free bainite in medium carbon steels. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Rahmani, F. (2023). The effect of graphene addition to Bi0.5Sb1.5Te3 and Bi2Te2.7Se0.3 in order to improve thermoelectric properties. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Saffaran, S. (2023). The effect of anodizing treatment on the corrosion behavior of AZ91-SiC composite prepared by semi-solid casting method. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Ghasemzadeh Namaghi, M. (2023). Investigating the performance of nanocomposite with silicon rubber base and carbon nanotube reinforcement with the presence of phase change materials in soft actuators. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Golgoli, M. (2023). The effect of laser welding variables on the microstructure of the overlaps joint of thick plates of austenitic stainless steel and low carbon steel. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Jahani, M. (2023). Electrodeposition of nanostructured composite of WO3-CNT for using in supercapacitors. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hadian Kaffash, N. (2023). Effect of wobble laser modes on recrystallization of hydroxyapatite on Ti-6Al-4V substrate in simulated body fluid. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Maydanshahi, S. (2023). The effects of thermal annealing on the crystallization and mechanical behaviors of additive manufactured Polylactic acid -PLA- based on the 3D-printing parameters. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Abbaszadeh, Z. (2023). Investigation on microstructure and corrosion resistance of Inconel 625 laser cladded layer on 304L substrate. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Montakhab, M. (2023). Investigation on microstructure and mechanical properties of Ni-Ti 2-layered coating on stainless steel substrate using welding process. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Zarifiyan, A. (2023). Effect of process parameters on microstructure and solidification morphology of Stellite during laser additive manufacturing. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Sharifi, A. (2023). mechanical and chemical properties of Ti-4Al-5V/Ti/BG FGM synthesized by SPS method. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Ramezanian, N. (2023). Electrocatalytic properties of dealloyed nanostructured Ni-Cu for Hydrogen evolution reaction. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Talebi, A. (2023). Electrodeposition of Phosphide-Based Compounds in the Presence of Hydrogen Bubbles for the Water Splitting Reaction -DHBT. , (Master's thesis of Material Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.

Recent research projects


Contact Information

Iran, Mashhad, Azadi Square, Ferdowsi University of Mashhad

Faculty of Engineering, Department of Materials And Metallurgical Engineering

Phone: +985138806057

Fax: +985138763305